Door model SKYDAS 2000 is designed especially for the outdoor conditions and is suitable even for the passive house! New construction improvements allowed to reach the rating of thermal transmittance of 1 W (m2K) maintaining a stable metal construction of the frame and the door leaf. All the metal structure of frame and the leaf edge are also covered by the finishing board, thus the cold bridge is eliminated and the appearance of the door is especially aesthetic. -Finishing painted RAL: made of water resistant EDM plate (warranty 3 years) or humidity resistant Umidax plate (warranty 1 year); -Other choice for finishing – hardwood plywood (okoume) WRB (20 shades of wood); -Burglar resistance tested and approved in Lithuania, KTU laboratory – RC3 (resistance class 3) by EN 1627:2011 standard; -Bood soundproofing (42 dB Rw (C;Ctr)) and thermal transmittance1 W (m2K); -Made to measure; -Unlimited design possibilities, single, double, with side or upper panels; inswing or outswing; -Designed for the premises both private and public; indoor and outdoor use (when using finishing made to withstand outdoor conditions). Certificates
Standard door set: 1. Door frame – bent rectangular metal profile, completely covered in waterproof EDM or WRB board. 2. Door leaf – bent special metal structure, completely covered in waterproof EDM or WRB board. 3. Hinges with supporting bearings, covered with chrome-plated finishing caps – 3 pieces. 4. Protective pins for door hinges (16 mm Ø) – 2 pieces. 5. Insulation seals – 2 pieces. 6. Peephole. 7. Outside and inside door leaf finish – EDM or WRB board. 8. Outside and inside architraves – EDM or WRB board. 9. Locks – see the selection here. 10. Stainless steel threshold. 11. ASSA plate in the door frame. 12. Additional extended rings in the door frame.
Saves the heat in your home SKYDAS 2000 is distinguished from other armoured entrance doors by the covering of its entire metal construction (including the frame and leaf edge) with certified, waterproof, and especially durable wood fibreboard Umidax HLS, which eliminates the cold bridge characteristic to other armoured entrance doors. Due to this unique construction if maintained propely the door SKYDAS 2000 does not freeze, steam up, cover in condensate or frost. It is achieved without sacrifices of security and durability. As the bent profile leaf structure does not have closed cavities, it can be completely thermally insulated by 60 mm rock wool. The L-shaped threshold and frame of the new SKYDAS 2000 ensure exclusive tightness as an additional seal is applied to the entire perimeter (two seals in total). Moreover, bent profile allows insulating the entire frame. Thermal transmittance of SKYDAS 2000 is 1 W/(m2K) therefor suitable for passive houses (the lower the transmittance rate, the more heat is held in).
High sound insulation Due to the above mentioned full thermal insulation of the door structure, the sound insulation of the door SKYDAS 2000 is even 42 dB. Thus, if outside your door the noise of the city is approximately 60 dB, you will only hear 18 dB (60 dB noise – 42 dB door sound insulation). Such noise level would not even disturb your sleep (recommended noise level in the bedroom and children rooms is 25-30 dB).
Safe Inside leaf structure is reinforced by rigid edges that do not allow easy deformation of the door in case of burglary. On the hinge side there are two pins of 16 mm in diameter that do not allow dislodging the door if the hinges are cut.
Durable and lasting, convenient to use All SKYDAS doors are manufactured by especially precise programmed machines Amada, which can process metal with the precision of 0.1 mm, therefore, their construction is precisely accurate and straight. As hinges with supporting bearings are used, the doors are easy to open and close, despite of heavier weight characteristic to metal doors. The tests indicated that after 100,000 cycles of opening and closing, the construction of the door remained completely intact. As the internal construction of the door has no closed cavities, the entire metal construction is covered in powder coating, which ensures long-term surface protection from corrosion. There are several options for the door finishing. Most commonly we use sustainably sourced EDM board (Extreme Durable MDF). It gives the freedom of design and is also water resistant, dimensionally stable and withstands severe atmospheric changes therefore is ideal for the finishing of entrance doors. For those who prefer wood-looking entrance door we offer – Water Resistant Board (WRB) made of natural hardwood veneers (okoume). This type of plywood is designed to withstand the most severe outside conditions. It‘s wood texture gives the luxury look to your door and does not limit your design ideas.
Available designs You can choose from almost 200 standard carvings or we will produce the doors according to individual design. Doors can be with the glazing of various shapes, single leaf, double leaf, with arch, etc. See GALLERY for doors photos. If simpler construction door is required, choose the “armoured” door SKYDAS STANDARD. If higher security level is necessary, choose SKYDAS STANDARD 3 or SKYDAS PREMIUM PLIUS, which can be adjusted to outdoor conditions by using suitable materials.
SKYDAS 2000 section
|Matt stainless steel threshold (2 mm)||Black or RUUKKI galvanized steel threshold (2 mm), covered in glossy||Black or RUUKKI galvanized steel threshold (2 mm) with powder|
|Skydas 2000||20×104; 20x35x104 L-shaped||32×104 (20 mm black or RUUKKI galvanized steel threshold (2 mm), covered in 12 mm Umidax board and 0.6 mm stainless steel finish)|
|Handle ASSA 6638, with spring. Finishing: Chrome Mat chrome Other- on request|
|Handle ASSA 1956, with spring Finishing: Chrome Mat chrome Other- on request|
|Handle ASSA 6647 Finishing: Chrome Mat chrome Other- on request|
|Fixed handle ASSA 496 Finishing: Chrome Mat chrome Other- on request|
|Handle Y96, with spring Finishing: Chrome Mat chrome|
|Handle ASSA YALE A6647, with spring. Finishing: Chrome Mat chrome|
Handle K27, with spring Finishing: Chrome Mat chromeMat stainless steel handle up to 1m. (stainless steel decoration of the door leaf is not included)Mat stainless steel handle up to 2m.Cable shell (for electromechanical locks)ASSA case plateMottura drill resistive lock plate (to protect the lock from drilling). Suitable for locks: Mottura, Fiam and Mul-T-Lock CFMA.Stainless steel decoration up to 0,3m2 of the door leaf (handle is not included)Stainless steel decoration up to 0,3m2 at the bottom of the door leaf.3D milling up to 0,3m2Ventilation gridDoor closer ASSA D15 (for the door up to 85 kg) Door closer ASSA D35 (for the door up to 120 kg) Extra prolonged rings into case (for safe type lock for the doors Skydas 2000) Glossy brass plastic hinge covers Glossy chrome plastic hinge covers Mat stainless steel hinge covers Electric bolt Down sliding door seal The peak to protect from rain (for the interior-opening doors) Sloping threshold 15x100x20 mm Door leaf laminated with 2 PVC colours up to 0,2m23-pins additional locking mechanism MOTTURA 96087IAlarm sensor at the top of the casing
|Without inner opening decoration With inner opening decoration||Interior opening decoration|
Other accessories: All metal construction made of electro-galvanized steel RUUKKI (for the door to be used in the outdoor conditions). All metal construction made of mat stainless steel. All metal construction made of glossy stainless steel. Glazing of various shapes.
Metal door construction is given the warranty of 5 years. The colour coating of the metal door construction for using under interior conditions is given the warranty of 3 years. The colour coating of the galvanized metal door construction for using under outdoor conditions is given the warranty of 2 years. Door finish:
- MDF board, laminated by PVC film (interior conditions) – 3 years.
- Umidax HLS board, painted (outside and inside) – 1 year.
- Umidax HLS board, laminated by PVC film (without milling) under outdoor conditions, for the outside of the door – 1 year.
- Umidax HLS board, laminated by PVC film (without milling) under outdoor conditions, for the inside of the door – 1 year.
- Solid wood and natural veneer are available on request. Under interior conditios warranty 3 years. Under outside conditions – not given the warranty.
Locks – manufacturer’s guarantee (see LOCKS). Peepholes, handles, seals, lock finish parts are not given a warranty.