If you want to enjoy warm, tight and safe armoured door, SKYDAS STANDART is the right choice for you!

Design possibilities meeting most elaborate requests, thoroughly thought-out construction, and especially competitive price helped these doors to win the favour of our customers.

SKYDAS STANDART is a unique and economical model of armoured door SKYDAS, characteristic of bent metal constructions providing good sound and heat insulation and therefore, suitable both for apartments and private houses (using the materials suitable for outdoor conditions). The door can be non-standard and fire resistant. 

More about the features of the door
Standard door set
Certificates and technical data




Rating of sound insulation

41 dB Rw (C;Ctr)

Rating of thermal transmittance

1,3 W (m2K)

Resistance to repeated opening and closing

100 000 cycles

Identification of resistance to wind load

Class C5

Measurement of air permeability

Class 4

Identification of water tightness

Class 6A

Identification of mechanical strength and rigidity

Class 4 

Identification of fire resistance (optional)

EI 30/ EI45


Note. All the parameters indicated in this table are valid for the doors with internal and external architraves.



Standard door set:

  1. Door frame - bent L-shaped profile fixed in the door aperture by 8 pins. Complete thermal insulation by rock wool or foam.
  2. Door leaf – special bent metal structure; 100% thermal insulation by 50 mm rock wool; total width of the leaf – 75 mm.
  3. Hinges with supporting bearings, covered with chrome-plated finishing caps – 2 pieces.
  4. Protective roll pins for door hinges (16 mm Ø) – 2 pieces.
  5. Insulation seals – 2 pieces.
  6. Peephole (14 Ø).
  7. Outside and inside door leaf finish – see the selection here.
  8. Outside architraves.
  9. Locks – see the selection here.

Door characteristics

 Saves the heat in your home
As the bent profile leaf structure does not have closed cavities, it can be completely thermally insulated by 50 mm rock wool. The L-shaped bent frame and threshold ensure exclusive tightness as an additional seal is applied to the entire perimeter (two seals in total).

Thermal transmittance of SKYDAS STANDART is 1.3 W/(m2K), i.e. the same like of 6-chamber plastic windows (the lower the transmittance, the more heat is held in). Therefore, this door is suitable not only for an apartment, but also for a private house (using the materials suitable for outdoor conditions).

 Good sound insulation and shutting out the odours 
Due to the above mentioned full thermal insulation of the door construction, the sound insulation of the door SKYDAS STANDART is 41 dB.
This door is especially tight and therefore, perfectly shuts out the odours and smoke from the outside.

 Fire resistant
With additional fire resistant components SKYDAS STANDART can protect from fire for as long as 45 minutes and withstand the temperature of 1000ºC. The certificate was issued by Inspecta Estonia OU, No. 1527-CPD-0017. It is especially relevant in apartment buildings, where fire can spread from the neighbours or when the door is set on fire, and in private houses - from the boiler room or garage.

 Durable and lasting, convenient to use
All SKYDAS doors are manufactured by especially precise programmed machines Amada, which can process metal with the precision of 0.1 mm, therefore, their construction is precisely accurate and straight. As hinges with supporting bearings are used, the doors are easy to open and close, despite of heavier weight characteristic to metal doors. The tests indicated that after 100,000 cycles of opening and closing, the construction of the door remained completely intact.

As the internal construction of the door has no closed cavities, the entire metal construction is covered in powder coating, which ensures long-term surface protection from corrosion. 
The door finish is usually made of painted or PVC laminated MDF or Umidax-HLS board. Polyurethane paint is resistant to moisture, discolouring, cracking, and peeling; and PVC laminated MDF or Umidax-HLS board is especially resistant to scratching and chipping of corners. 
Under necessity, door finish can be easily replaced.

 Simple to take care of
Painted or PVC laminated door finish does not require any specific care and is easy to clean.

 Design possibilities
Choose a design from nearly 200 our finish carvings or we will manufacture a door according to an individual project prepared by an architect or us.

The door can be single, double, arched, with a fanlight, etc. See GALLERY for door photos.

Specially bent L-shaped door frame has 6 bending edges and thus is stronger than rectangular or tube frame, which have only 4 bending edges.

Internal leaf construction is reinforced by rigid edges that do not allow deforming the door easily in case of burglary.

On the hinges side there are 2 roll pins (16 mm Ø) that do not allow dislodging the door leaf if the hinges are cut. These protective pins roll on bearings and therefore are difficult to cut.

If reliable locks are used, this door will not only save the heat at home, but also protect from the noise and unwanted visitors.

However, if higher security level is necessary, choose security doors SKYDAS STANDART 2SKYDAS STANDART 3, or SKYDAS PREMIUM PLIUSwhich burglar resistance was tested and certified in an authoritative notified scientific research laboratory IFT Rosenheim, Germany. These door models were created applying the knowledge of the above mentioned laboratory of all possible ways and methods of burglary.

Technical data


Available versions of the door:


The door is manufactured precisely according to necessary measurements.

Fire resistance EI45 of the fire resistant door is applicable to measurements up to 2100x 980 mm. If the height or width is increased by 15% (but not more than 20% of the total area), fire resistance will be EI30.


Available thresholds (2 mm thick):

  1. black metal,
  2. RUUKKI galvanized steel,
  3. matt stainless steel.



Atitikties deklaracija